HI-TECH Classical V Belts are endless belts used in a wide range of applications. These belts have technically good design and are economical for most ordinary drives. They are anti-static, oil and heat resistant and can be used in applications where belt linear speeds do not exceed 30 meters/sec.

HI-TECH Classical V Belts come as pre set and fully comply with IS 2494 (Part 1) quality certification standards. Their exceptional operational reliability are the result of the use of high quality HMLS Polyster cord and Chloroprene in its rubber jacket fabric.

HI-TECH Narrow V Belts are especially suitable for drives with high belt speeds and are used in industrial and agricultural machinery. Since they need upto 50% smaller pulley widths than classical sections, this allows for a substantial size reduction in drives. Since most new drives these days use universal pulleys, the classical belt can in most cases be replaced with a narrow V-belt, thereby achieving better power transmission efficiency that eventually results in a longer belt life.

HI-TECH Narrow V-Belts are resistant to temperature and oil and they are antistatic. The belt core, made of high quality HMLS polyester cord and comprising the rubber compression zone, is resistant to intensive compressions and heat stresses while the power transmitting and cord is wrapped in Chloroprene rubber impregnated fabric cover which provides both protection against external influences and uniform friction against the pulleys. Our Narrow V-Belts are tolerance-stable manufactured and checked to comply with such exacting length tolerances that the belts can be used in pre set without sorting.

HI-TECH Hexagonal Belts are specially designed for convoluted and serpentine belt drive paths with reverse bends. The sudden direction changes in belt travel put unique stresses and demands on the belt carcass and structure and such loads are reliably handled by these anti-static and oil-resistant belts.

HI-TECH Hexagonal Belts have been designed with a new cross-section that keeps the belt perfectly aligned, both laterally and longitudinally, in the pulley groove. These belts use a high quality Polyester tensile member as its core and Chlcroprene is used in insulation rubber and is impregnated in the specially woven covering cloth.